Yaesu FT-2311R Operating Manual

CHART 2. FUNCTIONAL REFERENCEDesired FunctionCALL Ch (Mem 0) RecaliDial Step SelectMemory Hide/ RestareMemory RecaliMemory StoragePriority Ch. MonitorRepeater Odd SplitProgram Std. Rptr OffsetActivate Std. Rptr SplitReverse tx/rx freqs.ScanningStep Up/Down 1 MHz StepsUnlock (or Lock) KeysSet CTCSS Tone Freq.*ToKKle CTCSS ENC/DEC*Keystroke(s)Press [CALL][FMSTEP][F] + [M], Select Mem Ch., [F]+[M][D/MR], Rotate Knob[D/MR] (to Dial Mode), Select Freq.,[F] + [M], Select Mem Ch no., then [D/MR]Op on Mem, Priority Mon Ch 1: [F] + [PRI]Op on Dial, any Priority Mem: RecaliMem to Monitor, set Squelch, [D/MR],[F] + [PRI]. Press [D/MR] to cancel.Sìore rx freq. in Mem 0 - 6., lune Dialto tx freq., Stare in same Mem whileholding PTT (when pressing [D/MR]).("•*•/-" display ed when recalled).Turn power off. Hold [RPT] while turningpower back on. Tune display to offset,and press [RPT] to return to normal.[RPT] Once = -, Twice = +[REV]Set Squelch, [D/MR] to select Dial/Mem,Press and hold [UP] or [DOWN] i-sec.[F]+[UP]/[DOWN] or Tuning Knob[F] + [LOCK][FHTSET], Selector Knob, [TONE][TONE]Only if FTS-12 installed; otherwise inactive.FT-2311R1.2GHz FM TRANSCEIVERYAISUVYAESU MUSEN CO., LTD.C.P.O. BOX 15OOTOKYO, JAPANFT-2311R OPERATOR'S QUICK REFERENCE CHARTSCHART 1. KEY FUNCTIONSfLOCKMy2S3T SETiTEP«»Normal FunctionShift other keys toalternate functionsActivate Repeater Split(plus - minus - none)Select Dial or Memory modeJump to CALL Channel (0)Toggle Subaudible Tone*ENC - ENC/DEC - offReverse Repeater Split(only if REPT active)Dial Mode: Down 1 Ch StepMem Mode: Down 1 Ch no.Dial Mode: Up 1 Ch StepMem Mode: Up 1 Ch no.Alternate Function (after Di )Cancel alternate key functionsLock (or unlock) ali keys. (exc this one and F)Memorize displayed dataToggle Priority Channel MonitoringCheck/Set Subaudible Tone freq.Toggle Channel Steps(12.5 or 25kHz)Down 1 MHz(no action in Mem Mode)Up 1 MHz(no action in Mem Mode)Only if FTS-12 installed; otherwise inactive.