Yaesu FT-250R - ANNEXE 824 Manual
                                            | |
Contents
| 
FT-250R O PERATING M ANUAL 31The FT-250R includes a convenient “Clone” feature, which allows the memory and con-figuration data from one transceiver to be transferred to another FT-250R. This can beparticularly useful when configuring a number of transceivers for a public service opera-tion. Here is the procedure for Cloning one radio’s data to another:c Turn both radios off.d Connect the optional CT-27 cloning cable between the MIC/SP jacks of the two ra-dios.e Press and hold the PTT and LAMP key while turning the radio on.f Rotate the DIAL to select “CLONECLONECLONECLONECLONE.”g Press the [F/L] key, to enter the CLONE mode. “CLONECLONECLONECLONECLONE” will appear on the displaysof both radios when the Clone mode is successfully activated in this step.h On the Destination radio, press the MONI key (“SAVINGSAVINGSAVINGSAVINGSAVING” will appear on the LCD).i Press the PTT key on the Source radio; “SENDINGSENDINGSENDINGSENDINGSENDING” will appear on the Source radio,and the data is transferred.j If there is a problem during the cloning process, “C-ERRORC-ERRORC-ERRORC-ERRORC-ERROR” will be displayed. Checkyour cable connections and battery voltage, and try again.k If the data transfer is successful, the Destination radio will return to normal operation;Turn both radios off and disconnect the CT-27. You can then turn the radios back on,and begin normal operation.CloningOptional Cloning Cable "CT-27" |
Related manuals for Yaesu FT-250E
manualsdatabase
Your AI-powered manual search engine