Yaesu FT-252 Operating Manual
                                                                    | |
Contents
| 
FT-252 O peraTing M anual20CTCSS/DCS OperationSplit Tone OperationThe FT-252 can be operated in a Split Tone configuration via the Set mode.1. Press the [SET/ATS] key to enter the Set mode.2. Rotate the DIAL knob or press the [p]/[q] key to selectSet Mode Item 39: SPLIT.3. Press the [SET/ATS] key momentarily to enable adjust-ment of this Item.4. Rotate the DIAL knob or press the [p]/[q] key to select ON (to enable the SplitTone feature).5. Press the PTT switch momentarily to save the new setting and exit to normal operation.When the Split Tone feature is activated, you can see the following additional param-eters following the “DCS” parameter (while selecting the tone mode by Set Mode Item40: SQL.TYP):D: DCS Encode only (the “ ” icon will appear during operation)T DCS: Encodes a CTCSS Tone and Decodes a DCS code(the “ ” icon will blink and the “ ” icon will appear during operation)D TSQL: Encodes a DCS code and Decodes a CTCSS Tone(the “ ” icon will appear and the “ ” icon will blink during opera-tion)Select the desired operating mode from the selections shown above. |
Related manuals for Yaesu FT-252
manualsdatabase
Your AI-powered manual search engine