Yaesu FT-411 MKII Operating Manual

Also see for FT-411 MKII: Operating manual Operating manual Technical supplement Technical supplement

Contents

FT-411 MKII OPERATING MANUAL 25DATA CloningIt is possible to copy all of the stored data from one transceiver to another (both must beFT-411 MK ’s, of course) without having to re-enter everything from the keypad. To dothis, you will need to construct a cable with two 2.5 mm micro phone plugs, and follow theprocedure here:Å Turn off both transceivers and connect the MIC jacks together with the cable justdescribed.Ç Press and hold the [F/M] key while turning on each transceiver. The displays will flashall segments.É Press the [q] key on the transceiver that is to receive data. The display will stopflashing, and remain either on or off (either is okay).Ñ Press the [p] key on the transceiver that is to send its data. Data from memory 1 willnow be displayed on the other transceiver, and all other data will be transferred in afew seconds.If “Err” is displayed on the destination transceiver, switch the power off and back onagain (while holding the [F/M] key), and repeat steps É and Ñ.Ö When the data has been transferred successfully, turn off both transceivers and removethe cable.2.5mm micro phone plug 2.5mm micro phone plugShield Cable (as short as practical)