Yaesu FT-50 Instruction Manual
Also see for FT-50R: Technical supplementTechnical supplementTechnical supplement
                                                             | |
Contents
| 
To use the radio for packet, the receiver battery savershould be disabled (see page 49), since the “sleep”periods used in power saving can cause packets tobe missed.Construct a TNC interface cable as shown in thedrawing, and connect the MICIEAR jack to your TNC.MIC impedance is 2 klCZ, and maximum input is 300mVrms. EAR impedance is 8 ohms, and maximumoutput is 2 Vrms (w/9.6-V supply).Note - the FT-50R is not recommend for use with9600 bps data interconenctiortlpacket operation.Packet RadioDetail of packet cable construction.-El El - Station Interconnections forPacket OperationAFSK Packet- .-..RS-232C Serialinterface CablePatch CableController UnitL.- - _. _~_..~ JPersonal Computerwith Terminal SoftwarePackage installed.FT-50RTransceiver |
Related manuals for Yaesu FT-50R
Yaesu FT-5100 Instruction Manual
Yaesu FT-7B Instruction Manual
Yaesu FT-77 Instruction Manual
Yaesu FT-75B Instruction Manual
Yaesu FT-224 Instruction Manual
Yaesu FT-707 Instruction Manual
Yaesu FT-301 Instruction Manual
Yaesu FT-102 Instruction Manual
Yaesu FT-200 Instruction Manual
Yaesu FT-223 Instruction Manual
manualsdatabase
Your AI-powered manual search engine