Yaesu FT-857 Operation Manual
Also see for FT-857 series: ManualTechnical supplementBrochure & specsOperating manualTechnical supplement
                                                                                                                                    | |
Contents
| 
62 FT-857 Operating ManualCW Identifier SetupThe ARTS™ feature includes a CW identifier, as discussed previously. Every ten minutesduring ARTS™ operation, the radio can be instructed to send “DE (your callsign) K” if thisfeature is enabled. The callsign field may contain up to 10 characters.Here’s how to program the CW Identifier:1. Press and hold the [FUNC] key for one second to enter the Menu mode.2. Rotate the SELECT knob to recall Menu Mode No-001 [EXT MENU], then rotate theDIAL to change the setting to “ON” to enable the extended Menu Mode.3. Rotate the SELECT knob to select the Menu Mode No-010 [ARTS IDW].4. Press the SELECT knob momentarily to initiate callsign storage (the first characterlocation of the callsign field will be underlined.).5. Rotate the DIAL knob to select the first letter/number of your callsign, then rotate theSELECT knob one click clockwise to save the first letter/number and move to the nextentry position.6. Repeat the previous step as many times as necessary to complete your callsign.7. Press the SELECT knob momentarily to save your completed callsign and exit.8. Rotate the SELECT knob one click counter-clockwise to select the Menu Mode No-009 [ARTS ID].9. Rotate the DIAL to set the CW ID function to “ON.”10. Press and hold in the [FUNC] key for one second to save the new setting and exit tonormal operation.TRANSMITTER OPERATIONFM TRANSMISSION |
Related manuals for Yaesu FT-857 series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine