Yaesu FT-8800R Quick Start Manual

Also see for FT-8800R: Operating manual Brochure & specs Operating manual Technical supplement Operating manual

VEM FT-8800 Quick Start (Rev “A”) Page 6Key• Press this key momentarily to activate the Scanner on the adjoining band.• When the adjoining band is set to the Memory mode, press and hold in this key for ½ second to shift to the MemoryTuning feature on the adjoining band.Right Side Keys when in Key Mode 2 ( )To set the right side keys to Key Mode 2:•••• Press the SET key momentarily to enter the Set mode.•••• Rotate the DIAL knob to select Menu #20 KEY.MOD.•••• Press the DIAL knob momentarily, and then rotate the DIAL knob to change the setting to KEY 2.•••• Press and hold in the DIAL knob for ½ second to save the new setting and exit to normal operation.When set to Key Mode 2, the indicator is displayed and the keys function as follows:MHz Key: while in Key Mode 2• Press this key momentarily to allow tuning in 1-MHz steps on the Main band VFO.• Press and hold in this key for ½ second to allow tuning in 10-MHz steps on the Main band VFO.REV Key: while in Key Mode 2• Press this key momentarily to reverse the transmit and receive frequencies on the Main band during split-frequency (i.e.Repeater) operation.• Press and hold in this key for ½ second to change the frequency shift direction:RPT – (minus shift) → RPT + (plus shift) → RPT OFF (simplex)TONE Key: while in Key Mode 2• Press this key momentarily to change the Tone Squelch mode:ENC (CTCSS Encoder) → ENC.DEC (CTCSS Tone Squelch) → DCS (DCS operation)SUB Key: while in Key Mode 2• Press this key momentarily to activate the Sub band function (the icon will blink on the Sub band). When the Subband function is activated, any keys you press act on the Sub band.• When the Sub band function is activated (the icon is blinking on the Sub band), press this key momentarily todeactivate the Sub band function.

/ 7

Related manuals for Yaesu FT-8800R