Yaesu FT-950 - MENU MODE LIST Manual

Also see for FT-950: Brochure & specs Reference Update Update Update

Contents

Yaesu FT-950 - MENU MODE LIST Manual Manual pdf 1 page image

Page 104 FT-950 OPERATING M ANUALM ENU M ODEThe Menu system of the FT-950 provides extensive customization capability, so you can set up your transceiver just theway you want to operate it. The Menu items are grouped by general utilization category, and are numbered from “001 AGC001 AGC001 AGC001 AGC001 AGCFST DLYFST DLYFST DLYFST DLYFST DLY” to “118 TGEN EMRGNCY118 TGEN EMRGNCY118 TGEN EMRGNCY118 TGEN EMRGNCY118 TGEN EMRGNCY”.USING THE MENU1. Press the [MENU] button momentarily, to engage theMenu mode.The display will show the Menu Number, Menu GroupName, and Menu Item. Press the [SELECT] knobmomentarily to toggle the display between “MenuNumber & Menu Group Name” and “Menu Item”. TheMulti-Display Window shows the current setting of thecurrently selected Menu item.2. Rotate the [SELECT] knob to select the Menu itemyou wish to modify.3. Rotate the [CLAR/VFO-B] knob to change the cur-rent setting of the selected Menu item.ADVICE:Press the [CLEAR] button (located the upper right ofthe [SELECT] knob) momentarily to reset the selectedMenu item to the factory default value.4. When you have finished making your adjustments,press and hold in the [MENU] button for one secondto save the new setting and exit to normal operation. Ifyou only momentarily press the [MENU] button, thenew settings will not be retained.M ENU MODE R ESETYou may reset all the Menu settings to their origi-nal factory defaults, if desired.1. Turn the front panel [POWER] switch off.2. Press and hold in the [MENU] button, and whileholding it in, press the [POWER] switch to turnthe transceiver back on. Now release the[MENU] button.[CLAR/VFO-B] Knob[MENU] ButtonPressMenu Number Menu Group NameMenu SettingMenu ItemMenu Setting[SELECT] Knob[CLEAR] Button