7Checking Received Messages and ImagesUse the GM function to check the messages and images on the LOG list.• When using a GM function, a beep sounds when a new message or image is received,and the “LOG MSG” or “LOG PICT” list screen (see step 3 below) appears automatically.1. Press the [GM] key.2. Touch [LOG].3. Touch [MESSAGE] or [PICT].VOICE: Audio recorded (Only playback of record-ed content is possible.)MESSAGE: Text MessagePICT: ImagePICTMESSAGEVOICESelect “MESSAGE” or “PICT” to display the LOG MSGlist or LOG PICT list.The icons on the left side of the LOG list indicate thefollowing:Message received (unread)Message received (read)Message sentMessage failed to sendImage received (unread)Image received (read)Image sentImage failed to sendImage taken with the camera built in the optionalmicrophoneJA1YOE-123 00/00JA1YOE-123 00/00JA1YOE-123 00/00JA1YOE-123 00/00NEW4. Touch the message or image to be displayed.• The selected message or image will be displayed.• When the message list is displayed, press the [DISP] key to display the locationinformation of the sending station on the compass screen.• When the picture is displayed, press the [DISP] key to display the location wherethe picture was taken on the compass screen.• Touch [FWD], to forward the checked message or image data. Refer to “Forwarding