Yaesu FTM-100DR Instruction Manual

Also see for FTM-100DR: Instruction manual Instruction manual Operating manual Quick manual Operating manual

Contents

Yaesu FTM-100DR Instruction Manual Manual pdf 12 page image

12Sending MESSAGE (Massages) or Images (PICT)Replying to the sender of the checked message or image dataReply to the sender of the checked message or image data.1 Press and hold for over one second.Displays the “LOG SELECT” screen.2 Rotate the DIAL to select [GM MESSAGE] or[GM PICT], then press .When [GM MESSAGE] is selected, the “GMMESSAGE” screen appears.When [GM PICT] is selected, the “GM PICT”screen appears.3 Rotate the DIAL to select the data you want to reply to, then press .Displays the selected data.[MESSAGE] [PICT]4 Press ( appears on the upper side).Displays the message entry screen.5 Enter the reply message.See “Creating and sending a new message” on page 9 to enter the replymessage.Tips • When replying, the call sign of the MESSAGE/PICT data sender is automatically specifiedfor “to:”.• In other words, even if you specify the data sender's call sign (name) for “to:” to reply, otherstations operating GM on the same frequency can still view the message or image as longas they are within the communication range.6 Press .Displays the entire message.7 Press ( appears on the upper side).Sends the message. When message or image transmission completes, “Completed”appears and then the screen returns to either the message list screen or image listscreen.

/ 15

Related manuals for Yaesu FTM-100DR