75WIRES-X SoftwareMain MenuSettings for the transceiverConfigure the settings such as the usage of the node transceiver and operating frequency.1 From the “File” menu, select “Transceiver”The “Transceiver” window will appear.2 If needed, change the settings or enter values3 Click [Apply]The settings will be saved.Tips • Clicking [OK] saves the settings and closes the “Transceiver” window.• Clicking [Cancel] closes the “Transceiver” window without saving the settings.4 Click [OK]The “Transceiver” window will close.Operation modeSelect one of the following 4 WIRES-X modes in accordance with your transceiver configuration.Tip The default setting is Analog.• Digital .......................................Operates only the voice channel with a transceiver• Digital DW ................................Operates the voice channel and preset search channel by dual-watching with a transceiverTip Dual Watch Timing setting: The interval time to switch monitoring between the voice channel and presetsearch channel can be set from 1 second to 15 seconds in 1 second increment. Normally, set it to 1second.Caution When operating in GM mode, this mode cannot be selected.• Digital Double ...........................Uses one transceiver for the voice channel and the other for the preset search channelCaution When operating in GM mode, this mode cannot be selected.• Analog ......................................Operates only the voice channel with an analog transceiverCaution When operating in GM mode, this mode cannot be selected.
