Yale Real Living YRD210-ZB Installation And Programming Instructions

Also see for Real Living YRD210-ZB: Manual

Contents

Yale Real Living YRD210-ZB Installation And Programming Instructions Manual pdf 11 page image

10An ASSA ABLOY Group brandP/N AYRD220-INST-FUL Rev BLow Battery Warning1 Lock-out Mode2 Return to previous step3Status IndicatorsLockout Mode: This feature is enabled by the Master PIN code. When enabled, it restricts all user PIN code access.When the unit is in Lockout Mode, the red locked padlock will appear on the screen when attempting to enter a PIN code.Low Battery: When battery power is low, the low battery icon will begin blinking. If battery power is completely lost,use the key override.Master PIN code: The Master PIN code is used for programming and for feature settings. NOTE: The default MasterPin Code must be changed prior to any further programming of the lock. The Master PIN code will also operate thelock.Privacy Mode : This button located under the thumb turn on the inside escutcheon, activates/deactivates the voiceresponse and keypad and is indicated by a blue LED flash every ten (10) seconds. It is also overridden by mechanicallyoperating the thumb turn or key.Auto Re-lock: After successful PIN code entry and the unit unlocks, it will automatically re-lock after a default of thirty(30) seconds. Re-lock time is adjustable from five (5) to thirty (30) seconds.OneTouch Re-Lock: When the bolt is retracted, activating the keypad will extend the bolt (during Auto Re-Lock durationor when Auto Re-Lock is disabled).Shutdown Time: The unit will shutdown for a default of sixty (60) seconds and not allow operation after the wrong codeentry limit has been met. When the unit is in Shutdown, the red locked padlock icon will flash every ten (10) seconds.Silent Mode: Enabling Silent mode shuts off the code confirmation tone playback for use in quiet areas. Silent mode isselected in the Volume feature (4) of Menu Mode. There are three levels (High/Low/Silent).Status LED: Located on inside escutcheon.User PIN code: The User PIN code operates the lock. Maximum number of user PIN codes is 250 with Network Module;without Network Module, maximum is 25 user PIN codes.Wrong Code Entry Limit: After a specified number of unsuccessful attempts at entering a valid PIN code the unit willshut down and not allow operation. Wrong code entry limit is adjustable from three (3) to ten (10) times through featuresettings (up to 5 times with no RF network enabled - default is 5; 10 with RF network enabled).DefinitionsSettings Factory DefaultsMaster Code 12345678Auto Re-lock EnabledVolume HighAuto Re-lock Time *30 SecondsWrong Code Entry Limit *5 TimesShutdown Time *60 SecondsLanguage ENGLISHFactory Defaults*Adjustable only when using Network Module