Trouble Recovery74wheel or other moving parts when theengine is running. Do not install thestarter mechanism or top cowling afterthe engine is running.● Do not touch the ignition coil, sparkplug wire, spark plug cap, or other elec-trical components when starting or op-erating the motor. You could get anelectrical shock.EMU29562Emergency starting engine1. Remove the top cowling.2. Remove the start-in-gear protection ca-ble from the starter, if equipped.3. Remove the starter/flywheel cover afterremoving the bolt(s).4. Prepare the engine for starting. For fur-ther information, see page 43. Be surethe engine is in neutral and that the clipis attached to the engine shut-off switch.The main switch must be “ ” (on), ifequipped.5. If equipped the choke knob, pull out itwhen the engine is cold. After the enginestarts, gradually return the choke knobto its home position as the engine warmsup.6. Insert the knotted end of the emergencystarter rope into the notch in the flywheelrotor and wind the rope several turnsaround the flywheel clockwise.7. Give a strong pull straight out to crankZMU03920ZMU02334ON STARTOFFZMU01906ZMU03921
