2-21EEMD60010TILT SUPPORT LEVERTo keep the outboard motor in the tilted-upposition, lock the tilt support lever to theclamp bracket.EMD63210TOP COWLING LOCK LEVERSV6To remove the engine top cowling, pull upthe front and rear lock levers. Then lift offthe cowling. When replacing the cowling,check to be sure it fits properly in the rubberseal. Then lock the cowling again by mov-ing the levers downward.403033301021301022V6V6301023V4 EMD64010TOP COWLING RELEASE LEVERV4The top cowling can be removed by operat-ing the cowling release lever.Pulling the front lever unlocks the top cowl-ing for removal.When refitting the top cowling:1) Set the top cowling straight down ontothe engine, being careful to avoid catch-ing spark plug leads or other wires.