E2-12403011*q 301041*000945qEMD60010TILT SUPPORT LEVERTo keep the outboard motor in the tilted-up position, lock the tilt support lever tothe clamp bracket.q301042*EMD63111TOP COWLING LOCK LEVERSTo remove the engine top cowling, turnthe front lock lever and rear lock lever(s).Then lift off the cowling. When replacingthe cowling, check to be sure it fits prop-erly in the rubber seal. Then lock thecowling again by returning the levers tothe locked position.1 Top cowling lock leverEMU01146FLUSHING DEVICEThis device 1 is used to clean the coolingwater passages of the motor using a gar-den hose and tap water.NOTE:Refer to “Cleaning Cooling-waterPassages” in Chapter 4 for instructions onusage.
