Yamaha 9.9F Owner's Manual

Also see for 15F: Owner's manual Owner's manual Owner's manual Owner's manual Owner's manual

Components17To increase resistance, turn the adjusterclockwise.To decrease resistance, turn the adjustercounterclockwise.WARNINGEWM00040Do not overtighten the friction adjuster. Ifthere is too much resistance, it could bedifficult to steer, which could result in anaccident.EMU26261Trim rod (tilt pin)The position of the trim rod determines theminimum trim angle of the outboard motor inrelation to the transom.EMU30440Tilt lock mechanismThe tilt lock mechanism is used to prevent theoutboard motor from lifting out of the waterwhen in reverse gear.To tilt the outboard motor up, set the tilt locklever to the “ ” (up) position. To tilt the out-board motor down, set the tilt lock lever to the“ ” (down) position.EMU26332Tilt support barThe tilt support bar keeps the outboard motorin the tilted up position.NOTICEECM01660Do not use the tilt support bar when traile-ring the boat. The outboard motor couldshake loose from the tilt support and fall.If the motor cannot be trailered in the nor-mal running position, use an additionalsupport device to secure it in the tilt posi-tion.1. Tilt lock lever