Yamaha 900SW Owner's Manual

Also see for Soavo-900SW: Brochure & specs Owner's manual Service manual

Contents

Yamaha 900SW Owner's Manual Manual pdf 11 page image

7 EnSee pages 7 - 8 when your amplifier has subwoofer (line out) terminal(s), or see pages 9 - 11 when your amplifier has nosubwoofer (line out) terminal.• Do not connect the power cord of this unit and other components into an AC outlet until all connections betweencomponents are completed.• Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. Also, refer to the owner’smanual of your component to be connected to this unit.• The connection methods or the names of the terminals may differ depending on the component. Refer to the owner’smanual of your component as well.When your amplifier has a one-channel subwoofer terminalConnect the subwoofer (or low pass etc.) terminal of your amplifier to the INPUT 3 ( /MONO) terminal of this unitusing a commercially available mono pin cable.When your amplifier has two-channel subwoofer terminals■Using one subwooferConnect the “L” side subwoofer terminal of your amplifier to the INPUT 3 ( /MONO) terminal of this unit and “R” sidesubwoofer terminal of your amplifier to the INPUT 3 ( ) terminal of this unit using a commercially available audio pincable.• Some amplifiers have line output terminals labeled PRE OUT. When you connect this unit to the PRE OUT terminalsof the amplifier, make sure that the amplifier has at least two sets of PRE OUT terminals. If the amplifier has only oneset of PRE OUT terminals, do not connect this unit to the PRE OUT terminals. Instead, connect this unit to the speakerterminals of the amplifier (see pages 9 - 10).• When connecting to a monaural line output terminal of the amplifier, connect the INPUT 3 ( /MONO) terminal.• When connecting to line output terminals of the amplifier, other speakers should not be connected to the OUTPUTterminals on the rear panel of this unit. If connected, they will not produce sound.CONNECTIONSNotesConnecting to the amplifier equipped with subwoofer (line out) terminal(s)1LOUTPUTTO SPEAKERSFROM AMPLIFIERLLL RRRLRMONOINPUT3INPUT2INPUT 1AmplifierMono pin cable (not included)SubwooferLRNotesLOUTPUTTO SPEAKERSFROM AMPLIFIERLLL RRRLRMONOINPUT3INPUT2INPUT 1Audio pincable(not included)AmplifierSubwoofer