Yamaha 90a Owner's Manual

Also see for 60F: Service manual Owner's manual Owner's manual Owner's manual Owner's manual

Contents

Yamaha 90a Owner's Manual Manual pdf 38 page image

Operation32Remote control models:● Turn the steering wheel full-right and full-left. Make sure operation is smooth andunrestricted throughout the whole rangewith no binding or excessive free play.● Operate the throttle levers several times tomake sure there is no hesitation in theirtravel. Operation should be smooth overthe complete range of motion, and each le-ver should return completely to the idle po-sition.● Look for loose or damaged connections ofthe throttle and shift cables.EMU36483Engine shut-off cord (lanyard)Inspect the engine shut-off cord and clip fordamage, such as cuts, breaks, and wear.EMU27120Oil● Check to be sure you have plenty of oil foryour trip.EMU27153Engine● Check the engine and engine mounting.● Look for loose or damaged fasteners.● Check the propeller for damage.● Check for engine oil leaks.EMU27171Operation after a long period ofstorageWhen operating the engine after a long peri-od (12 months) of storage, proceed as fol-lows:1. Use a 50:1 gasoline-oil mixture to startthe engine.2. Start the engine. Leave it idling.WARNING! Do not touch or removeelectrical parts when starting or dur-ing operation. Keep hands, hair, andclothes away from the flywheel andother rotating parts while the engineis running. [EWM00091]3. Watch for oil flowing through the oil feedpipes. After any air in the oil lines hasbeen expelled, the oil injection system1. Cord2. Clip3. Engine shut-off switch1. Cord2. Clip3. Engine shut-off switch