Yamaha ATS-1070 Quick Start Manual

Also see for ATS-1070: Owner's manual

Before using the sound bar, make sure you have received all of the following items.Install the sound bar on the TV stand, etc.The sound bar can also be mounted on a wall, using the includedmounting template and commercially available screws. Refer to theOwner’s Manual for additional installation instructions.Supplied itemsATS-1070 Quick Start Guide UAENSound bar (ATS-1070)Remote controlA CR2025 Lithium batteryhas already been insertedinto the remote control.Optical digital audio cablePower cableMounting templateUse when mounting the sound bar on a wallSpacers × 2Use when mounting thesound bar on a wallOwner’s ManualAnalog audio cable(RCA plug (L/R)-3.5 mmmini plug cable)Quick Start Guide(This sheet)Preparing the remote controlRemove the battery’s insulating strip beforeattempting to use the remote control.Battery’s insulating stripInstallationTouch panelRemote control sensorNOTICE• Do not stack the sound bar and a BD player or other device directly on each other.Doing so may cause a malfunction due to vibrations.Published 04/2017 KS-A0Manual Development Group© 2017 Yamaha CorporationAV16-0019— 1 —

/ 2

Related manuals for Yamaha ATS-1070