Yamaha AVR-S80 Service Manual

Also see for AVR-S80: Owner's manual

Contents

AVR-S80/NX-SW8024AVR-S80/NX-SW80Reference dataINPUT: VIDEO 1 ANALOG (Both ch)Sub-menu CENTER SP REAR SP MAIN SP MAIN LEVEL LFE/BASS1 MAIN: SMALL 0dB LARGE LARGE SMALL 0dB SWFR2 CENTER: NONE NONE LARGE LARGE 0dB BOTH3 LFE/BASS: MAIN SMALL SMALL LARGE 0dB MAIN4 FRONT MIX: 5CH LARGE LARGE LARGE 0dB BOTH4. SPEAKERS SETThe input signal is automatically identified and switched inthe priority order of dts → DOLBY DIGITAL → AAC →PCM AUDIO → Analog (A/D) according to the signaldetection.The signals output from the DSP block are the same as 1.DSP THROUGH: YSS 0dB.LARGE: This mode is used with a speaker with highbass reproduction performance (a largeunit). Full bandwidth signals are output.SMALL: This mode is used with a speaker with lowbass reproduction performance (a smallunit). The signals of 90Hz or less are mixedinto the channel specified by LFE/BASS.NONE: This mode is used with no center speaker.The center content is reduced by 3dB anddistributed to MAIN L/R.The analog switch settings for each sub-menu are asshown in the table below.MAIN: SMALL 0dBFront Mix: 5chLFE/BASS: MAINSub-menu Input level Volume 6CH PRE OUTFRONT L/R (1kHz) CENTER (1kHz) RL/RR (1kHz) SUBWOOFER (50Hz)1 MAIN: SMALL 0dB 1kHz/90Hz Both ch, -20 dBV -10 dB -16.5/-19.5 dBV - ∞ - ∞ - ∞2 CENTER: NONE 1kHz Both ch, -20 dBV -10 dB - ∞ -16.0 dBV - ∞ - ∞3 LFE/BASS: MAIN 50Hz Both ch, -20 dBV -10 dB - ∞ - ∞ - ∞ -4.0 dBV4 FRONT MIX: 5CH 1kHz Both ch, -20 dBV -10 dB -16.5 dBV - ∞ - ∞ - ∞