Yamaha AVX-S30 Owner's Manual

Also see for CinemaStation AVC-S30: Owner's manual

Contents

OPERATION12Once you have finished all cable connections (pages 8-10) and remote control preparation (page 11), follow theprocedure below to start from basic playback operation.1 Press STANDBY/ON ( ).This unit turns on and the indicators on the frontpanel light up.yThis unit has the auto-sleep function which automaticallyswitches to the standby mode if you do not operate the unitfor about 24 hours while the unit is turned on.2 Press one of the INPUT buttons (1 to 4) toselect an input source.For example, if the DVD-S30 is connected to theINPUT (1) jack on the rear panel of this unit, pressINPUT (1) to select the DVD-S30.3 Start playback on the selected externalcomponent.For information on the external component, refer tothe manual for that product.4 Press VOLUME +/– to adjust the volumelevel.yTo turn off the volume temporarily, press MUTE. While themute function is on, the Input indicators (other than onecurrently selected) blink. To disable the mute function, pressMUTE once again.Now, please try various features of this unit!To enjoy high realistic sensational sounds with a DSPprogram→ “Enjoying realistic sounds (CINEMA DSP)” (page 13)To enjoy stereo sounds such as CD audio with virtualmulti channels→ “Enjoying stereo sounds with multi speaker channels (DolbyPro Logic II)” (page 13)To enjoy virtual surround sounds with the DVS function→ “Using the DVS function (Dolby Virtual Speaker)” (page 13)To configure the orientation of virtual surroundspeakers→ “Adjusting the Orientation of the Virtual Surround Speakers”(page 16)OPERATIONBasic OperationSTANDBY/ON STANDBY/ONDVD095 6 7 844321321REPEAT SUBTITLEAUDIOZOOMSHIFTTV INPUTDUAL MONOTV CHSETUPRETURNMENUVOLUMETV VOLMUTENIGHTTESTINPUTL RMODEMOVIE SPORTS GAMEMUSICENTERON SCREENqVSTVANGLESW CENTER SURRA-BSTANDBY/ON( )INPUTbuttonsVOLUME+/–MUTE