Yamaha CZR15 Owner's Manual

Contents

CZR series Owner’s Manual 9Rotatable HornWhen shipped from the factory, the directivity of CZR in a vertical orientation is the setting which makes the soundexpand in a horizontal direction, and inhibits or narrows the sound in a vertical direction. We recommend changingthe directivity by rotating the horn when you want to install CZR horizontally or when you want to use them as a floormonitor and broaden the directivity.1. Using a 2.5 mm hexagonal wrench, remove all fixing screws (CZR10: six total) on the grille, and remove the grille from thespeaker.2. Using a No. 2 Phillips head screwdriver, remove all screws installed on the horn and pull the horn out from the speaker.3. Rotate the horn 90 degrees, and re-install the horn to the speaker, reversing the steps above.• Make sure not to push the screws too strongly with the Phillips head screwdriver. This may cause the nuts inside the cabinet to fall off.• If the horn cannot smoothly be pulled out, hook the notches using a flat-bladed screwdriver, and pull out.NOTEScrews (eight total)NotchVerticalRotate 90°Horizontal