Yamaha DS60-112 Owner's Manual

Also see for DS60-112: Service manual

Contents

3WARNING- When using any electrical or electronic product,basic precautions should always be followed. These precautionsinclude, but are not limited to, the following:1. Read all Safety Instructions, Installation Instructions,Special Message Section items, and any Assembly Instructionsfound in this manual BEFORE making any connections, includingconnection to the main supply.2. Do not attempt to service this product beyond that de-scribed in the user-maintenance instructions. All other servicingshould be referred to qualified service personnel.3. Main Power Supply Verification: Yamaha products aremanufactured specifically for the supply voltage in the area wherethey are to be sold. If you should move, or if any doubt existsabout the supply voltage in your area, please contact your dealerfor supply voltage verification and (if applicable) instructions. Therequired supply voltage is printed on the name plate. For nameplate location, please refer to the graphic found in the SpecialMessage Section of this manual.4. DANGER-Grounding Instructions: This product must begrounded and therefore has been equipped with a three pin attach-ment plug. If this product should malfunction, the ground pinprovides a path of low resistance for electrical current, reducingthe risk of electrical shock. If your wall socket will not accommo-date this type plug, contact an electrician to have the outlet re-placed in accordance with local electrical codes. Do NOT modifythe plug or change the plug to a different type!5. WARNING: Do not place this product or any other ob-jects on the power cord or place it in a position where anyonecould walk on, trip over, or roll anything over power or connect-ing cords of any kind. The use of an extension cord is not recom-mended! If you must use an extension cord, the minimum wiresize for a 25' cord (or less) is 18 AWG. NOTE: The smaller theAWG number, the larger the current handling capacity. For longerextension cords, consult a local electrician.6. Ventilation: Electronic products, unless specifically de-signed for enclosed installations, should be placed in locationsthat do not interfere with proper ventilation. If instructions forenclosed installations are not provided, it must be assumed thatunobstructed ventilation is required.7. Temperature considerations: Electronic products should beinstalled in locations that do not seriously contribute to their oper-ating temperature. Placement of this product close to heat sourcessuch as; radiators, heat registers etc., should be avoided.8. This product was NOT designed for use in wet/damp loca-tions and should not be used near water or exposed to rain. Ex-amples of wet /damp locations are; near a swimming pool, spa, tub,sink, or wet basement.9. This product should be used only with the componentssupplied or; a cart ,rack, or stand that is recommended by themanufacturer. If a cart, rack, or stand is used, please observe allsafety markings and instructions that accompany the accessoryproduct.10. The power supply cord (plug) should be disconnected fromthe outlet when electronic products are to be left unused for ex-tended periods of time. Cords should also be disconnected whenthere is a high probability of lightening and/or electrical stormactivity.11. Care should be taken that objects do not fall and liquids arenot spilled into the enclosure through any openings that may exist.12. Electrical/electronic products should be serviced by a quali-fied service person when:a. The power supply cord has been damaged; orb. Objects have fallen, been inserted, or liquids have beenspilled into the enclosure through openings; orc. The product has been exposed to rain; ord. The product does not operate, exhibits a marked changein performance; ore. The product has been dropped, or the enclosure of theproduct has been damaged.13. This product, either alone or in combination with an ampli-fier and headphones or speaker/s, may be capable of producingsound levels that could cause permanent hearing loss. DO NOToperate for a long period of time at a high volume level or at alevel that is uncomfortable. If you experience any hearing loss orringing in the ears, you should consult an audiologist.IMPORTANT: The louder the sound, the shorter the time periodbefore damage occurs.14. Some Yamaha products may have benches and/or acces-sory mounting fixtures that are either supplied as a part of theproduct or as optional accessories. Some of these items are de-signed to be dealer assembled or installed. Please make sure thatbenches are stable and any optional fixtures (where applicable) arewell secured BEFORE using. Benches supplied by Yamaha aredesigned for seating only. No other uses are recommended.INFORMATION RELATING TO PERSONAL INJURY, ELECTRICAL SHOCK,AND FIRE HAZARD POSSIBILITIES HAS BEEN INCLUDED IN THIS LIST.IMPORTANT SAFETY INSTRUCTIONS92-469-3PLEASE KEEP THIS MANUAL