72 DSR112/DSR115/DSR215/DSR118W Owner’s ManualReferencesItalianoEspañolFrançaisDeutschEnglishInput Characteristics0dBu is referenced to 0.775Vrms.*1. THD+N=10% at minimum impedanceD-CONTOUR Frequency Response ChartTransducer Section DSR112 DSR115 DSR215 DSR118WLow-Frequency 12" cone 15" cone 2 x 15" cone 18" coneMagnet Materials Neodymium Magnet Neodymium Magnet Ferrite Magnet Ferrite MagnetVoice Coil Diameter 3" 3" 2.5" 3"High-Frequency 2" Titanium diaphragm compression driver -Magnet Materials Neodymium Magnet -EnclosureMaterial LINE-X® coated woodDimensions (W × H × D) 370 × 638 × 368 mm(14-9/16" × 25-1/8" × 14-1/2")442 × 755 × 423 mm(17-3/8" × 29-3/4" × 16-5/8")467 × 1158 × 520 mm(18-3/8" × 45-9/16" × 20-1/2")520 × 638 × 584 mm(20-1/2" × 25-1/8" × 23")Weight 21.2 kg (46 lbs) 28.0 kg (61 lbs) 49.8 kg (109 lbs) 42.0 kg (92 lbs)Externals Finish, Color LINE-X®, BlackGrille 16 gauge matte black powder coated perforated steel grilleMetal Handle 1pc (Top Board) 2pcs (Side Board)Pole Socket Diameter 35mm (Bottom Board) - 35mm (Top Board)Flying Hardware 3 x M10 (Top L/R 1pc each, Bottom rear 1pc) - -MIC/LINE switch: LINE DSR112 DSR115 DSR215 DSR118WInput SensitivityLEVEL position:maximum 0dBuLEVEL position:center (12 o'clock) +7dBu -Maximum Input Level +24dBuInput Impedance 12kΩ 10kΩMIC/LINE switch: MICInput Sensitivity LEVEL position:maximum -25dBu -Maximum Input Level -11dBu -Input Impedance 8kΩ -RESPONSE (dB)FREQUENCY (Hz)BoostrangeD-CONTOUR OND-CONTOUR OFF