Basic components25Use the “ ” (set) button to rotate the fuel flowdisplay in the following order: Press the “ ” (set) button once to displaythe fuel flow of the starboard engine. An “ ”(for starboard) will also be displayed. Press the “ ” (set) button a second time todisplay the fuel flow of the port engine. A “ ”(for port) will also be displayed. Press the “ ” (set) button a third time toreturn the display to the total fuel flow ofboth engines. “ ” (for port and starboard)will also be displayed to indicate both theport and starboard engines.NOTE: The fuel flow meter displays gallons/hour orliters/hour according to operator prefer-ence. Select the desired unit of measure-ment by setting the selector switch on theback of the gauge during installation. The fuel consumption meter and fuel econ-omy meter will indicate the same unit ofmeasurement.EMU26760Fuel consumption meterThis gauge displays the total amount of fuelconsumed since the gauge was last reset.Press the “ ” (mode) button repeatedlyuntil the indicator on the face of the gaugepoints to total “ ” (total). To reset the totalfuel consumption to zero, press the “ ” (set)and “ ” (mode) buttons at the same time.EMU26770Fuel economyThis gauge displays the distance per liter orgallon when cruising, and is only for referenceuse by the operator.Press the “ ” (mode) button repeatedlyuntil the indicator on the face of the gaugepoints to “ ” (economy).1. Selector switchZMU01749ZMU01751ZMU01752
