2-12E301011EMD62110TOP COWLING LOCK LEVERTo remove the engine top cowling, pullup the lock lever. Then lift off the cowling.When replacing the cowling, check to besure it fits properly in the rubber seal.Then lock the cowling again by movingthe lever downward.000971EMD60010TILT SUPPORT LEVERTo keep the outboard motor in the tilted-up position, lock the tilt support lever tothe clamp bracket.EMU01546FLUSHING DEVICEThis device 1 is used to clean the coolingwater passages of the motor using a gar-den hose and tap water.NOTE:Refer to “CLEANING COOLING-WATERPASSAGES” in Chapter 4 for instructionson usage.000280qEMU00162TOP COWLING LOCK LEVERTo remove the engine top cowling, turnthe lock lever. Then lift off the cowling.When replacing the cowling, check to besure it fits properly in the rubber seal.Then lock the cowling again by movingthe lever upward.1 Top cowling lock lever001240qF60, T60F50, T50
