INSTRUMENT AND CONTROL FUNCTIONS3-53EAU00118Handlebar switchesEAU00119Pass switch “ ”Press this switch to flash the headlight.EAU03888Dimmer switch “ / ”Set this switch to “ ” for the highbeam and to “ ” for the low beam.EAU04077Windshield position adjustingswitch “ ”To move the windshield up, push thisswitch in direction a. To move thewindshield down, push the switch in di-rection b.NOTE:_When the engine is turned off, thewindshield will automatically return tothe lowest position._EAU03889Turn signal switch “ / ”To signal a right-hand turn, push thisswitch to “ ”. To signal a left-handturn, push this switch to “ ”. Whenreleased, the switch returns to the cen-ter position. To cancel the turn signallights, push the switch in after it has re-turned to the center position.EAU00129Horn switch “ ”Press this switch to sound the horn.EAU03890Engine stop switch “ / ”Set this switch to “ ” before startingthe engine. Set this switch to “ ” tostop the engine in case of an emergen-cy, such as when the motorcycle over-turns or when the throttle cable isstuck.EAU00143Start switch “ ”Push this switch to crank the enginewith the starter. EC000005CAUTION:_See page 5-1 for starting instruc-tions prior to starting the engine._1. Pass switch “ ”2. Windshield position adjusting switch “ ”3. Dimmer switch “ / ”4. Turn signal switch “ / ”5. Horn switch “ ”1. Engine stop switch “ / ”2. Start switch “ ”E_5jw.book Page 5 Friday, March 30, 2001 2:14 PM
