GENERAL CHASSIS4-5EAS1RC1401REMOVING THE AIR SCOOPS1. Remove:• Air scoop (left) “1”▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼a. Remove the air scoop bolt “2” and quick fas-teners “3”.b. Pull the air scoop off at the areas “a” shown.▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲2. Remove:• Air scoop (right) “1”▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼a. Remove the air scoop bolt “2” and quick fas-teners “3”.b. Pull the air scoop off at the areas “a” shown.▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲EAS1RC1402INSTALLING THE AIR SCOOPS1. Install:• Air scoop (left) “1”▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼a. Insert the projection “a” on the air scoop intothe grommet “b” and insert the projection “c”on the air scoop into the hole “d”.b. Install the air scoop bolt and quick fastenerscrews, and then tighten the bolts to specifi-cation.▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲2. Install:• Air scoop (right) “1”▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼a. Insert the projection “a” on the air scoop intothe grommet “b” and insert the projection “c”on the air scoop into the hole “d”.b. Install the air scoop bolt and quick fastenerscrews, and then tighten the bolts to specifi-cation.▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲EAS1RC1404INSTALLING THE FUEL TANK MOLES1. Install:• Fuel tank mole (left) “1”▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼a. Install the hole “a” in the fuel tank mole ontothe projection “b” on the air scoop stay.Air scoop bolt1.5 Nm (0.15 m·kgf, 1.1 ft·lbf)123aa213aaaT R. .Air scoop bolt1.5 Nm (0.15 m·kgf, 1.1 ft·lbf)abd1bbcT R..1abd bbc