INSTRUMENT AND CONTROL FUNCTIONS3-83EAU3942AMulti-function meter unitWARNINGEWA12422Be sure to stop the vehicle beforemaking any setting changes to themulti-function meter unit. Changingsettings while riding can distract theoperator and increase the risk of anaccident.The multi-function meter unit isequipped with the following: a speedometer (which shows theriding speed) a tachometer (which shows enginespeed) an odometer (which shows the to-tal distance traveled) two tripmeters (which show thedistance traveled since they werelast set to zero) a fuel reserve tripmeter (whichshows the distance traveled sincethe left segment of the fuel meterstarted flashing) a clock a fuel meter a coolant temperature display an air intake temperature display a self-diagnosis device an LCD and tachometer bright-ness control modeTIP Be sure to turn the key to “ON” be-fore using the “SELECT” and “RE-SET” buttons. For the U.K. only: To switch thespeedometer and odometer/trip-meter displays between kilometersand miles, press the “SELECT”button for at least one second.TachometerThe electric tachometer allows the riderto monitor the engine speed and keep itwithin the ideal power range.When the key is turned to “ON”, the ta-chometer needle will sweep onceacross the r/min range and then returnto zero r/min in order to test the electri-cal circuit.1. Coolant temperature display/air intake tem-perature display2. Speedometer3. Tachometer4. Odometer/tripmeter/fuel reserve tripmeter5. “SELECT” button6. “RESET” button7. Clock8. Fuel meter1. Tachometer2. Tachometer red zoneU2D1E3E0.book Page 8 Monday, July 14, 2008 3:08 PM