PRE-OPERATION CHECKS4-34Throttle grip• Make sure that operation is smooth.• Check cable free play.• If necessary, have Yamaha dealer adjust cable free play and lubricate cable andgrip housing.6-16, 6-26Control cables • Make sure that operation is smooth.• Lubricate if necessary. 6-25Drive chain• Check chain slack.• Adjust if necessary.• Check chain condition.• Lubricate if necessary.6-23, 6-25Wheels and tires• Check for damage.• Check tire condition and tread depth.• Check air pressure.• Correct if necessary.6-17, 6-20Brake and shift pedals • Make sure that operation is smooth.• Lubricate pedal pivoting points if necessary. 6-26Brake and clutch levers • Make sure that operation is smooth.• Lubricate lever pivoting points if necessary. 6-27Centerstand, sidestand • Make sure that operation is smooth.• Lubricate pivots if necessary. 6-27Chassis fasteners • Make sure that all nuts, bolts and screws are properly tightened.• Tighten if necessary. —Instruments, lights, signalsand switches• Check operation.• Correct if necessary. —Sidestand switch • Check operation of ignition circuit cut-off system.• If system is defective, have Yamaha dealer check vehicle. 3-25ITEM CHECKS PAGEU3C3E2E0.book Page 3 Friday, July 6, 2007 9:09 AM
