7-147This procedure should be practiced at slow speedmany times in a large unpaved area with no obsta-cles. If an incorrect technique is used, your ATVmay continue to go straight. If the ATV doesn’tturn, come to a stop and then practice the proce-dure again. If the riding surface is slippery or loose,it may help to position more of your weight over thefront wheels by moving forward on the seat.Once you have learned this technique, you shouldbe able to perform it at higher speeds or in tightercurves.Improper riding procedures such as abrupt throttlechanges, excessive braking, incorrect body move-ments, or too much speed for the sharpness of theturn may cause the ATV to tip. If the ATV begins totip over to the outside while negotiating a turn, leanmore to the inside. It may also be necessary togradually let off on the throttle and steer to the out-side of the turn to avoid tipping over.Remember: Avoid higher speeds until you arethoroughly familiar with the operation of your ATV.CLIMBING UPHILLUse proper riding techniques to avoid ATV over-turns on hills. Be sure that you can maneuver yourATV well on flat ground before attempting any in-cline and then practice riding first on gentle slopes.Try more difficult climbs only after you have devel-oped your skill. In all cases avoid inclines with slip-pery or loose surfaces, or obstacles that mightcause you to lose control.1. Lean towards inside of turn.2. Support your weight on the outer footboard.
