9-19EBU25861CLEANING AND STORAGEEBU25882CleaningFrequent, thorough cleaning of your ATV will notonly enhance its appearance but will improve itsgeneral performance and extend the useful life ofmany components.1. Before cleaning the ATV:a. Block off the end of the exhaust pipe toprevent water entry. A plastic bag andstrong rubber band may be used.b. Make sure the spark plug and all filler capsare properly installed.2. If the engine case is excessively greasy, applydegreaser with a paint brush. Do not applydegreaser to the wheel axles.3. Rinse the dirt and degreaser off with a gardenhose. Use only enough pressure to do thejob. WARNING! Wet brakes may have re-duced stopping ability, increasing thechance of an accident. Test the brakes af-ter washing. Apply the brakes severaltimes at slow speeds to let friction dry outthe linings. [EWB02312] NOTICE: Excessive wa-ter pressure may cause water seepageand deterioration of wheel bearings,brakes, transmission seals and electricaldevices. Many expensive repair bills haveresulted from improper high-pressure de-tergent applications such as those avail-able in coin-operated car washers. [ECB00712]4. Once most of the dirt has been hosed off,wash all surfaces with warm water and mild,detergent-type soap. An old toothbrush orbottle brush is handy for hard-to-reach pla-ces.5. Rinse the ATV off immediately with clean wa-ter and dry all surfaces with a chamois, cleantowel or soft absorbing cloth.6. Clean the seat with a vinyl upholstery cleanerto keep the cover pliable and glossy.7. Automotive type wax may be applied to allpainted and chrome plated surfaces. Avoidcombination cleaner-waxes. Many containabrasives which may mar the paint or protec-tive finish. When finished cleaning, start theengine and let it idle for several minutes.