8-291234567891011NOTE:Turning the adjusting bolt in decreases clutch freeplay and turning it out increases clutch free play.5. Tighten the locknut to the specified torque.NOTE:When tightening the locknut, hold the adjustingbolt with a screwdriver so that the adjusting boltdoes not turn together with the locknut.6. Install the rubber cap securely.7. Install the left footboard by installing thescrews and bolts, and then tighten the bolts tothe specified torque.EBU24890Checking and lubricating the cablesThe operation and the condition of all control ca-bles should be checked before each ride, and thecables and cable ends should be lubricated if nec-essary. If a cable is damaged or does not movesmoothly, have a Yamaha dealer check or replaceit.1. Rubber cap2. Locknut3. Adjusting boltTightening torque:Locknut:8 Nm (0.8 m·kgf, 5.8 ft·lbf)1 23 Tightening torque:Footboard bolt:10 Nm (1.0 m·kgf, 7.2 ft·lbf)Recommended lubricant:Engine oil
