Yamaha MSP Series Service Manual

Also see for MSP Series: Owner's manual Owner's manual Service manual

Contents

MSP5 STUDIO2 WARNINGComponents having special characteristics are marked and must be replaced with parts having specification equal to those originallyinstalled.IMPORTANT NOTICEThis manual has been provided for the use of authorized Yamaha Retailers and their service personnel. It has been assumed that basic serviceprocedures inherent to the industry, and more specifically Yamaha Products, are already known and understood by the users, and havetherefore not been restated.WARNING: Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury, destruc-tion of expensive components and failure of the product to perform as specified. For these reasons, we advise all Yamahaproduct owners that all service required should be performed by an authorized Yamaha Retailer or the appointed servicerepresentative.IMPORTANT: This presentation or sale of this manual to any individual or firm does not constitute authorization, certification, recognition ofany applicable technical capabilities, or establish a principal-agent relationship of any form.The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research engineering, and servicedepartments of Yamaha are continually striving to improve Yamaha products. Modifications are, therefore, inevitable and changes in specifica-tion are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the distributor’s ServiceDivision.WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated bygrounding yourself to the ground bus in the unit (heavy gauge black wires connect to this bus).IMPORTANT: Turn the unit OFF during disassembly and parts replacement. Recheck all work before you apply power to the unit.WARNING: CHEMICAL CONTENT NOTICE!The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plastic (Where applicable)components may also contain traces of chemicals found by the California Health and Welfare Agency (and possibly other entities) to causecancer and/or birth defects or other reproductive harm.DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHAT SOEVER!Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/fluxvapor!If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food.IMPORTANT NOTICE FOR THE UNITED KINGDOMConnecting the Plug and CordWARNING: THIS APPARATUS MUST BE EARTHEDIMPORTANT. The wires in this mains lead are coloured in accordance with the following code:GREEN-AND-YELLOW: EARTHBLUE: NEUTRALBROWN: LIVEAs the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in yourplug, proceed as follows:The wire which is coloured GREEN and YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safetyearth symbol or colored GREEN or colored GREEN and YELLOW.The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.