Using wireless surround speakers(MusicCast Surround function)Using devices that support the MusicCast Surround function, you can enjoy a 5.1.2-channelor 5.1-channel theater system with wireless surround speakers and subwoofer.■ Devices supporting MusicCast Surround■ Sample speaker layoutFor a 5.1.2-channel system using two MusicCast 20 speakers and one MusicCast SUB 100.Note• In a 5.1.2-channel or 5.1-channel system, the surround speakers and subwoofer can be wireless. With othersystems, only the subwoofer can be wireless.• With wireless surround speakers– Sound will not be output from the speaker terminals (SURROUND) and pre-out jacks (SURROUND) on themain unit.– Surround back speakers and rear presence speakers cannot be used.• With a wireless subwoofer– One subwoofer can be wireless.– Sound will not be output from the pre-out jacks (SUBWOOFER or SUBWOOFER 1 and 2) on the main unit.Therefore, another subwoofer cannot be used by connecting it with an audio cable.• The following audio cannot be output from the wireless surround speakers and subwoofer.– Signals with a sampling frequency of 352.8 kHz or 384kHz– DSD audio– DVD-Audio and Super Audio CD (SACD) from HDMI input1 This unit and the devices supporting MusicCast Surround must beregistered with the same location on the MusicCast CONTROLLER app.2 Follow the app’s on-screen instructions to complete setup of theMusicCast Surround function.For detailed setup instructions, refer to the following.https://download.yamaha.com/files/tcm:39-12123833 Adjust the speaker settings automatically (YPAO).Note• For details on YPAO, refer to the manual for this unit.• Multi measurement and angle/height measurement cannot be used.4 Confirm and check your YPAO settings, manually adjust if necessary,and then enjoy content playback.MusicCast Surround Setup with AV Receivers EnglishMusicCast 50Wireless streaming speakersAs of October 31, 2018MusicCast 20Network subwooferMusicCast SUB 10041 2953E RTap thesettings icon.Tap “MusicCastSurround/Stereo”.