Yamaha NS-100 Owner's Manual

Also see for NS-100: Service manual Owner's manual

Read these precautions carefully before using your speaker.● Any time you note distortion, reduce the volume control on youramplifier to a lower setting. Never allow your amplifier to bedriven into “clipping”. Otherwise the speaker may be damaged.● When using an amplifier with a rated output power higher thanthe nominal input power of the speaker, care should be takennever to exceed the speaker’s maximum input.● Do not attempt to clean the speaker with chemical solvents asthis might damage the finish. To clean, wipe with a dry, soft cloth.● To prevent the enclosure from warping or discoloring, do notplace the speaker where it will be exposed to direct sunlight orexcessive humidity.● Do not place the speaker where it is liable to be knocked over orstruck by falling objects. Stable placement will also ensure bettersound performance.● Placing the speakers on the same shelf or rack as the turntablecan result in feedback.● Secure placement or installation is the owner’s responsibility.YAMAHA shall not be liable for any accident caused by improperplacement or installation of the speaker.N S - 1 0 0 GTSpeaker SystemThank you for selecting this YAMAHA NS-100 speaker system.PRECAUTIONSPLACING THE SPEAKERSPlace the speakers on a sturdy, vibration-free surface, on a well-built stand.■ Using as 2ch stereo speakersBetter stereo images will be obtained when the speakers areslightly angled in towards the listeners.■ Using as main speakers in a multi channelsystemPosition the speakers on both sides of the TV. The positioning ofspeakers is important, because it controls the whole sound qualityof a multi channel system. Set up the speakers on the basis of yourlistening position by following the owner’s manual supplied withyour amplifier.OWNER’S MANUALType .......................... 2-way 2-speaker bass reflex speaker system(Magnetically-shielded type)Speaker Unit ............................................ 16 cm (6.5”) cone woofer3 cm (1”) dome tweeterNominal Impedance ............................................................. 6 ohmsFrequency Response ............................................... 38 Hz – 35 kHzNominal Input Power .............................................................. 100 WMaximum Input Power ........................................................... 300 WSensitivity ................................................................ 90 dB/2.83 V/mCrossover Frequency .............................................................. 3 kHzDimensions (WxHxD) ....................................... 212 x 416 x 270 mm(8.3” x 16.4” x 10.6”)Weight ................................................................... 8.6 kg (19.0 lbs.)● Specifications subject to change without notice due to productimprovements.● Care should be taken not to exceed the input power valuesnoted above.SPECIFICATIONSREMOVING THE FRONT COVERThe front cover is fastened to the enclosure at four points, and canbe removed if desired. To remove the cover, hold on to both sidesand slowly pull straight away from the speaker. To reattach, line upthe four pegs on the inside surface of the cover with the fourcorresponding holes on the speaker and push gently.NoteWhen the cover is removed, take care not to touch the speakerunits with your hands or to exert excessive force with tools.Surround LSurround RSubwooferCenterNS-100(Main R)NS-100(Main L)English

/ 3

Related manuals for Yamaha NS-100