NoteDo not let the bare speaker wires touch each otheras this could damage the speaker and/orthe amplifier.* Banana Plug connections are also possible. Firsttighten the terminal knob, and then insert theBanana Plug connector into the corresponding ter-minal hole.CONNECTION TOYOUR AMPLIFIERBEFORE MAKING CONNECTIONS, MAKE SURETHAT THE AMPLIFIER IS SWITCHED OFF.n CONNECTIONS● Connect the screw-type input terminals at the rearof the speaker to the speaker output terminals ofyour amplifier with the provided speaker cables.● One side of the speaker cable is red and the otherside is black. Connect the (+) terminals on both theamplifier and the speakers using this red side.Connect the (–) terminals on both componentsusing the black side of the cable. If connected withreversed polarity, the sound will be unnatural andlack bass.Procedures:À Loosen the terminal knob.Á Insert the bare wire end properly into the terminalhole. [Remove approx. 10 mm (3/8”) insulationfrom the speaker cable.]Â Tighten the knob.Ã Test the security of the connection by tugginglightly on the cable at the terminal.SPECIFICATIONSType .......2 way acoustic-suspension speaker systemMagnetic-shielding type (EIAJ)< NS-C150>Speaker Unit ............12 cm cone woofer (JA1282) x 22.5 cm dome tweeter (JA05S5)Input Terminal............................................Screw-typeNominal Impedance.........................................6 ohmsFrequency Response ...........60 Hz – 20 kHz (–10 dB)Resonance Frequency .....................................110 HzNominal Input Power............................................60WMusic Input Power..............................................220WSensitivity ...................................................90 dB/w/mCrossover FrequencyTweeter (Low Cut).........................4 kHz, 12 dB/oct.Dimensions (WxHxD)..................600 x 150 x 200 mm(23-5/8” x 5-7/8” x 7-7/8”)Weight.......................................5.8 kg (12 lbs. 13 oz.)Accessories ............................Speaker cable (4m) x 1Velcro strip x 2< NS-C105>Speaker Unit ............10 cm cone woofer (JA1076) x 22.5 cm dome tweeter (JA05S5)Input Terminal............................................Screw-typeNominal Impedance.........................................6 ohmsFrequency Response ...........65 Hz – 20 kHz (–10 dB)Resonance Frequency .....................................150 HzNominal Input Power............................................50WMusic Input Power..............................................200WSensitivity ...................................................90 dB/w/mCrossover FrequencyTweeter (Low Cut)...........................6 kHz, 6 dB/oct.Dimensions (WxHxD)..................540 x 135 x 180 mm(21-1/4” x 5-5/16 ” x 7”)Weight.....................................................5 kg (11 lbs.)Accessories ............................Speaker cable (4m) x 1Velcro strip x 2* Specifications subject to change without notice dueto product improvements.* Care should be taken not to exceed the input powervalues noted above.Black(–)LoosenTightenRed (+)RedVU 05280 Printed in Malaysia