Yamaha NS-10M Studio Instruction Manual

Also see for NS-10M: Mode d'emploi Mode d'emploi

Contents

specifications

C O N N E C T I O NBEFORE MAKING SPEAKER CONNECTIONS, MAKE SURE YOUR POWER AMPLIFIER IS TURNED OFF!Connecting the SpeakersThe terminals on the rear of the left and right speakers must be connected to the corresponding speakeroutput terminals on the rear of your power amplifier with appropriate speaker cables. Make sure that theright speaker is connected to the speaker output terminals on the amplifier marked “R” or “RIGHT”, andthe left speaker is connected to the amplifier output terminals marked “L” or “LEFT.” Also make sure thatthe red (+) terminal on each speaker is connected to the (+) output terminal of corresponding pair onthe amplifier, and the black (–) terminal on the speaker is connected to the (–) terminal, on the amplifier.If the speaker polarities are not properly matched, unstable stereo imaging and distortion will result.PlacementThe NS-10M STUDIO speakers are basically designed for horizontal placement, the speaker marked (A)in the above illustration corresponding to the right speaker and the (B) to the left. According to yourrequirements, however, the positions of the speakers may be reversed or they may be placed verticallywith no effect on reproduction quality. The speakers are marked (A) or (B) to the right of the serial numberon the rear panel label.Slippage at High Power LevelsVibration occuring when the speakers are driven at high power levels may cause them to move out ofposition. This can be prevented by applying the supplied non-slip sheet to the bottom surface of the speakerenclosures.2

/ 6

Related manuals for Yamaha NS-10M