Yamaha NS-AP7800E Owner's Manual

Also see for NS-AP7800E: Owner's manual

Contents

Yamaha NS-AP7800E Owner's Manual Manual pdf 6 page image

NS-AP7800M/NS-AP7800E6CONNECTIONS TO THE RECEIVERCONNECTIONS Check to make sure that the power has been turned off before making connections. Connect the (+) terminal of the amplifier to the (+) terminal of the speaker.Connect the (–) terminal of the amplifier to the (–) terminal of the speaker. Reversing polarity (+/–) will result in unnatural sound reproduction.NoteDo not let the bare speaker wires touch each other as this could damage the speaker, the amplifier, or both.PROCEDUREFor connections, keep the speaker cords as short as possible. Do not bundle or roll up the excess part of thecords. If the connections are faulty, no sound will be heard from the speakers. Make sure that the + and – polaritymarkings of the speaker cords are observed and set correctly. If these cords are reversed, the sound will beunnatural and lack bass.How to Connect:1 Press and hold the terminal’s tab.2 Insert the bare wire into the terminal hole.[Remove approx. 10 mm (3/8”) insulation from the speaker cords.]3 Release your finger from the tab to allow it to lock securely on the bare wire end.4 Test the firmness of the connection by pulling lightly on the cord at the terminal.Make sure the lead portions ofthe speaker cable are notexposed outside of theconnectors.No Good10 mmGood

/ 8

Related manuals for Yamaha NS-AP7800E