4ATTACHING THE GRILLEWhen you first remove the speakers from the box they will have protective paint covers attached. Please attachthe grilles to the speakers.NoteThese speakers are paintable. If you wish to paint the speakers, please do so before attaching the speakergrilles. Refer to “PAINTING THE SPEAKER CASING AND GRILLE” on page 8 for more information on paintingthe speakers.Attaching the grilles Remove the protective paint cover from the speaker cabinet. Align the grille with the grooves on the cabinet, then carefully push the grille edges onto the speaker cabinet.NoteWe recommend you use the supplied glue to guarantee that the grille is attached firmly. Apply the glue to theareas depicted in the diagram below at right.CAUTIONThe aluminum grilles are easy to bend out of shape. Please be careful when replacing the grille on the speaker,using only the minimum amount of force necessary.MOUNTING THE SPEAKERSThe speakers can be placed on a bookshelf or wall/ceiling mounted with optional speaker brackets using 1/4 x20 screws to fasten the optional bracket into the threaded inserts located on the back of the speakers. To wall /ceiling mount the speakers, use the supplied mounting bracket. (see below)Glue strips*Secure to wall or ceilingLarge bracket screwsEavesOUTDOOR NOTE :The supplied mountingbrackets allow thespeakers to bemounted in corners orunder eaves tominimize their exposureto rain or snow.Included mountingbracketGlue strips1. Use the bracket as a template mark the locations of the key hole slots on the mounting area.2. Next, using appropriate hardware (not included) securely fasten the bracket to the wall/ceiling.3. Position the speaker in the bracket and secure the speaker by using the two large bracket screws included.(see above)