E- 5EnglishRemoving the front coverThe front cover is attached to protect the speakerunit, but you can remove it if necessary.The front cover is fixed by magnets. Hold thespeaker with one hand, and pull the front covergently with the other to remove it.SpecificationsType.......... 2-way acoustic suspension speaker systemmagnetic shielding typeDriver......................8 cm (3.1 ”) cone woofer x 23 cm (1 ”) balanced dome tweeterImpedance ......................................................6 ΩFrequency Response...................65 Hz to 50 kHzRated Input Power ....................................... 40 WMaximum Input Power.............................. 120 WSensitivity................................... 86 dB/2.83 V/mCrossover Frequency .................................. 3 kHzDimensions (W x H x D)....... 107 (4.2”) x 360 (14.1”) x 133.7 (5.3”) mmWeight ..........................................2.4 kg (5.3 lbs)* Specifications are subject to change withoutnotice due to product improvements.Notes:• When removing the cover, be careful that you don’ttouch the drive units, and don’t exert excessiveforce with any tools.• There are magnets on the reverse side of the frontcover. Do not place the front cover close to objectsthat might be affected by magnets, such as TVs,clocks, magnetic cards, diskettes etc. afterremoving it.