Yamaha NS-P236 Owner's Manual

Also see for NS-P230: Owner's manual Service manual

Contents

E-6If you want to mount a speaker on a commercially available speaker stand for themain/rear speakers (and rear center speaker for NS-P236)MountingbracketScrew60 mmThe provided mounting bracket with 1 pair of screw holes(at an interval of 60 mm) can be used to mount thespeaker on a speaker stand.* Those screw holes can be used with M4 screws only.1 Attach the bracket to the bottom of the speaker byusing the provided screw so that the convex part ofthe bracket fits in the grooved part on the bottom ofthe speaker as shown on the left.2 Mount the speaker on the speaker stand by using thescrew holes on the bracket.NoteThe mounting bracket is provided for each speaker. Placing the the main/rear speakers (and rear center speaker forNS-P236)Nonskid padWhen placing the speakers on a flat surface, attach theincluded nonskid pads to the corners on the bottom of thespeakers as shown on the left. This prevents the speakersfrom sliding around.* For NS-P236, the nonskid pads include four spare ones.