Yamaha NS-P620 Owner's Manual

Contents

E-8For connections, keep the speaker cables as short aspossible. Do not bundle or roll up the excess part of thecables. If the connections are faulty, no sound will be heardfrom the speakers. Make sure that the + and – polaritymarkings of the speaker cables are observed and setcorrectly. If these cables are reversed, the sound will beunnatural and lack bass.How to Connect:1 Loosen the knob.2 Remove the insulation coating at the extremity of eachspeaker cable by twisting the coating off.3 Insert the bare wire.4 Tighten the knob and secure the cables.Test the firmness of the connection by pulling lightly onthe cables at the terminal.NoteDo not let the bare speaker wires touch each other asthis could damage the speaker or the amplifier, or bothof them.When using a banana plug<U.S.A., Canada, Australia, China and General modelsonly>(Main/center/rear speakers)1 Remove the cover by pulling it toward you.2 Tighten the terminal knob.3 Simply insert the banana plug into the terminal.(Subwoofer)1 Tighten the terminal knob.2 Simply insert the banana plug into the terminal.123Subwoofer (INPUT1/OUTPUT terminals)Red: positive (+)Black: negative (–)Main/center/rear speakersRed: positive (+)Black: negative (–)1234 How to connect speaker cables231Banana plugBanana plug1134