Yamaha NX-A01 Owner's Manual

Also see for NX-A01 - Speaker Sys: Product bulletin Owner's manual Service manual

Contents

To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.1. Install this unit in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources,vibration, dust, moisture, and/or cold.2. Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds.3. Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in anenvironment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this unit,which may cause an electrical shock, fire, damage to this unit, and/or personal injury.4. Avoid installing this unit where foreign objects may fall onto this unit and/or this unit may be exposed toliquid dripping or splashing. On the top of this unit, do NOT place:- Other components, as they may cause damage and/or discoloration on the surface of this unit.- Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal injury.- Containers with liquid in them, as they may fall and liquid may cause electrical shock to the user and/ordamage to this unit.5. Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. Ifthe temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury.6. Do not plug this unit into a AC wall outlet until all connections are complete.7. Do not operate this unit upside-down. They may overheat, possibly causing damage.8. Do not use force on switches, knobs and/or cords.9. When disconnecting the AC adaptor from the wall outlet, grasp the AC adaptor; do not pull the cord.10. Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.11. Only the voltage specified on this unit must be used. Using this unit with a higher voltage than specified isdangerous and may cause fire, damage to this unit, and/or personal injury. YAMAHA will not be heldresponsible for any damage resulting from use of this unit with a voltage other than that specified.12. Do not attempt to modify or fix this unit. Contact qualified YAMAHA service personnel when any serviceis needed. The cabinet should never be opened for any reason.13. When not planning to use this unit for long periods of time (i.e. when going on vacation), disconnect theAC adaptor from the AC wall outlet.14. Be sure to read the “Troubleshooting” section regarding common operating errors before concluding thatthe unit is faulty.15. Before moving this unit, press STANDBY/ON to set this unit to standby mode, and disconnect the ACadaptor from the wall outlet.16. Be sure to use the AC adaptor supplied with this unit. Using an AC adaptor other than the one providedmay cause fire or damage to this unit.17. Install this unit near the wall outlet and where the AC adaptor can be reached easily.18. For added protection for this product during a lightning storm, or when it is left unattended and unused forlong periods of time, unplug it from the wall outlet. This will prevent damage to the product due tolightning and power-line surges.WARNINGTO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAINOR MOISTURE.FOR CANADIAN CUSTOMERSThis Class B digital apparatus complies with Canadian ICES-003.We Want You Listening For A LifetimeYAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you toget the most out of your equipment by playing it at a safe level. One that lets the sound comethrough loud and clear without annoying blaring or distortion – and, most importantly, withoutaffecting your sensitive hearing. Since hearing damage from loud sounds is often undetectableuntil it is too late, YAMAHA and the Electronic Industries Association’s Consumer ElectronicsGroup recommend you to avoid prolonged exposure from excessive volume levels.Operate this unit by the following procedure.1. Press STANDBY/ON to turn on this unit. (The status indicator (LED) lights up.)2. Start playback on your portable audio player.For details, refer to the operation manual of your portable audio player.Notes● Be sure to adjust the volume level of your portable audio player to proper level before starting the playback onit.● When you disconnect the AC adaptor, the sound level of this unit returns to the default setting.y This unit is the stereo speaker. To enjoy the finesound balance between right and left, face theYAMAHA logo to the listening position.1 DC IN 12V jackConnect the AC adaptor to this jack to supply thepower to this unit.2 PORTABLE IN jackConnect a portable audio player to this jack.3 STANDBY/ONTurns this unit to on, or sets it to the standby mode.NoteStandby means this unit is set to off by STANDBY/ONwhen this unit is connected to the AC wall outlet. In thestandby mode, this unit consume a very small amount ofpower.4 Status indicator (LED)Indicates the current status of this unit. For details,refer to “About the status indicator (LED)”.5 VOLUME BBBBB / NNNNNAdjusts the volume level.Pressing BBBBB when the volume level is maximum (or NNNNNwhen the volume level is minimum) turns the statusindicator off for a moment.6 MUTEMutes the sound. To cancel the mute, press MUTEagain or VOLUME BBBBB / NNNNN. While muted, the statusindicator flashes.LED statusLighting upOffFlashing(every second)Flashing(rapidly)The current status of this unitThis unit is turned on.This unit is in the standby mode, or disconnected from the AC adaptor.This unit is muted.The protection circuitry has been activated.(Disconnect the AC adaptor and wait for a while.)Printed in China WH86970SPEAKER SYSTEMNX-A01 OWNER’S MANUALYou can enjoy real stereo sounds with this smart box.The high quality digital amplifier and the titanium diaphragm enable the high quality sound.INTRODUCTIONCONTROLS AND FUNCTIONS■ Supplied accessoriesPlease check that you received all of the following parts.AC adaptor ..................................................................................................................................... 1(Canada model: MU12-2120100-A1)(Europe model: MU12-2120100-C5)(China model: MU12-2120100-A2)Audio cable (stereo-mini plug) ........................................................................................................ 1NATURAL SOUND SPEAKER SYSTEM NX-A01DC IN 12V + - PORTABLE IN1 2VOLUMEMUTESTANDBY/ON3 4 5 6CONNECTIONS123USING THIS UNIT■ About the status indicator (LED)SPECIFICATIONSType .............................................................................................................. 1 box opposed stereo typeDriver ................................................................................. 3 cm (1-1/16”) titanium diaphragm full rangeFrequency Response ...................................................................................................... 90 Hz – 20 kHzDynamic Power ........................................................................................................................... 4 W x 2Input Sensitivity ........................................................................................................................... 200 mVMaximum Permissible Input ............................................................................................................ 2.0 VPower Supply ................................................................................................. 100 – 240 V AC, 50/60 HzPower Consumption .......................................................................................................................... 8 WStandby Power Consumption[Canada model] .......................................................................................................................... 0.6 W[China and Europe models] ........................................................................................................ 0.7 WDimensions (W x H x D) ..................................................... 84 x 89 x 84 mm (3-5/16 x 3-1/2 x 3-5/16 in)Weight ............................................................................................................................. 310 g (10.9 oz)* Specifications are subject to change without notice.Top panel (Control button)Rear panel© 2006 All rights reserved.EnglishConnect to this unit by the following procedure.1. Connect your portable audio player to the PORTABLE IN jack of this unit using thesupplied audio cable.2. Connect the AC adaptor plug to the DC IN 12V jack of this unit.3. Plug the AC adaptor to the AC wall outlet.AC adaptor (supplied)Audio cable (supplied)Portable audio playerTo AC wall outletIf this unit does not make any sound, check the following:- Make sure the connection between this unit and the portable audio player is collect.- Make sure the volume of this unit or the portable audio player is not set to minimum or muted.If the problem you are experiencing is not listed above, set this unit to the standby mode, disconnect the ACadaptor, and contact the nearest authorized YAMAHA dealer or service center.■ TroubleshootingCAUTION:READ THIS BEFORE OPERATING YOUR UNIT.Thank you for selecting this YAMAHA NX-A01 speaker system.YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADAYAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR, 22-34, 25462 RELLINGEN, BEI HAMBURG, GERMANYYAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCEYAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLANDYAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDENYAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIAC

/ 2

Related manuals for Yamaha NX-A01 - Speaker Sys