EnINTRODUCTIONPDX-30 is a portable player dock designed for iPhone or iPod series. The unitcan be operated by the remote control. Also the iPhone or iPod set into the unitis automatically charged so you can enjoy playing music as long as you want.Alphabetical letters below ( , , etc.) can be used for reference to theillustrations on the separate sheet “Quick Manual” for details.Suppled accessoresRemote control [ ] ...........................................................................................1AC adaptor [ ] .................................................................................................1(DC 15V, 2.66A, model number: NU40-2150266-I3)Power cable [ ] ................................................................................................1Owner’s Manual (this manual)...........................................................................1Quick Manual.....................................................................................................1Copyrght and logo marksPhone™, Pod™“iPhone” and “iPod” aretrademarks of Apple Inc.,registered in the U.S. andother countries.REPLACING THE BATTERYIN THE REMOTE CONTROL1 2 3■■CONTROLS AND FUNCTIONSDock termnal [ ]Connects the iPhone or iPod series. When the iPhone or iPod is connected, itsbattery will be charged. When the iPhone or iPod is disconnected, the unit will bein standby mode. The iPhone or iPod can be connected (or disconnected) anytime./ (Volume keys) [ ]Adjusts the volume level.Status ndcator (LED) [ ]Indicates the current status of the unit.LED status The current status of ths untOff The unit is in standby mode. An iPhoneor iPod is not connected, or has stoppedplaying. (However, lights up for 30 secondsafter connecting or stopping playback.)Flashes green Connecting, please wait.Flashes green once Adjusting the volume level with thevolume keys on the unit or operating withthe remote control.Lights up green The unit turns on. An iPhone or iPod isconnected.Lights up green and flashesredFlashes red for 2 seconds: An unsupportediPod is connected.Keeps flashing red: Connection failed.(Connect again.)Flashes red The protection circuitry has been activated.(Disconnect the AC adaptor and wait fora while.)Flashes red once The volume of this unit is set to maximumor minimum.DC IN 5V jack [ ]Connect the AC adaptor to this jack to supply power. When the AC adaptor isconnected, the unit will be in standby mode, consuming a small quantity ofelectricity. When an iPhone or iPod is connected to the unit in standby mode,the unit turns on. When the iPhone or iPod is disconnected, the unit returns tostandby mode.TROUBLESHOOTINGRefer to the table below if the unit does not function properly. If the problem you are experiencing is not listed below, or if the instruction below does not help, turnoff this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center.Problem Cause RemedyNo sound The iPhone or iPod is not connected firmly. Connect the iPhone or iPod firmly.The iPhone or iPod software version has not beenupdated.Download the latest iTunes software to update theiPhone or iPod firmware version to the latest.The power of the unit is off. Connect the AC adaptor correctly.The volume is turned down. Turn up the volume.The protection circuitry has been activated byexcessive volume.Turn down the volume.Cannot change the volume of ths unt bychangng the volume of the Phone or Pod.The iPhone or iPod being used is not supported bythis unit, or the iPhone or iPod is not connectedfirmly.Use the supported iPhone or iPod.Connect the iPhone or iPod firmly.The Phone or Pod dsplay does not changeby pressng the remote control volume keys.The unt cannot be operated by the remotecontrol.Englsh