6DISASSEMBLY PROCEDUREA. External fittings1. Handle assembly1-1. Remove the two (2) screws marked [G60d] andremove the handle.2. Corner metal fixture2-1. Remove the two (2) screws marked [G50] andremove the corner metal fixture. (Fig. 1)3. Leg3-1. Remove the one (1) screw marked [G110] andremove the leg. (Fig. 1)[G50]: Oval Head Tapping Screw-1 3.5X16 MFN133 (V3833600)[G60d]: Oval Flat Head Screw 5.0X25 FNM3-2B (V3743700)[G110]: Truss Head Tapping Screw-1 4.0X20 MFZN2BL (O3747290)Fig.14. Amplifier Unit4-1. Remove the four (4) screws marked [80] and four(4) angle washers marked [90] from the rear panel.(Fig. 2)4-2. Remove the four (4) screws marked [30] and four(4) angle washers marked [40] from the top panel.(fig. 2)5. Speaker5-1. Remove the four (4) screws marked [80] and four(4) angle washers marked [90] from the rear panel.(Fig. 2)5-2. Remove the four (4) screws marked [70]. Thespeaker can then be removed. (Fig. 2)Fig.2[30]: Oval Head Screw 5.0X35 MFV2BL (V3749300)[40]: Washer 5S MFC2BL (EW300020)[70]: Hexagonal Nut 4.0 MFZN2Y (O3760900)[80]: Oval Head Tapping Screw-1 4.0X30 MFC2BL (V3749400)[90]: Washer 4S MFC2BL (VB890200)[G110][G50] [G60d][80][90][70][30][40]