5-10ESU00039Headlight beam switchPush the headlight beam switch to change the headlightbeam to high or low.1 Headlight beam switch2 Push3 High beam4 Low beamESU00481Shroud latchesTo open the shroud, unhook the shroud latches, and thenslowly raise the shroud forward until it stops. When clos-ing the shroud, slowly lower it to its home position, andthen hook the shroud latches.1 Shroud latch2 ShroudCAUTION:@Make sure that all cables and wires are in place whenclosing the shroud.@WARNING@ Do not drive the snowmobile with the shroudopen, unlatched, or removed. Keep your body and clothing away from rotatingparts when servicing with the shroud open. Do not touch the hot muffler and engine during orimmediately after operation.@ESU00521Drive guardThe drive guard is designed to cover the V-belt clutchand V-belt in case parts break or come loose.WARNING@ Make sure that the drive guard is tightenedsecurely before operating the snowmobile. Never run the engine with the V-belt or driveguard removed.@