Yamaha RX10GTX Owner's Manual

Contents

Yamaha RX10GTX Owner's Manual Manual pdf 20 page image

Control functions143. Turn the main switch to the on position,and then, after 5 seconds, release the“SELECT” button.4. Push the “RESET” button to select thedesired display brightness level, and thenpush the “SELECT” button. The normaldisplay returns when the “SELECT” but-ton is released.NOTE:If the main switch is turned to the off positionor the engine is started before completing theprocedure, the setting is not applied.ESU10410High beam indicator light “ ”The high beam indicator light comes on whenthe high beams of the headlights are switchedon. (See page 19 for headlight beam switchoperation.)ESU10471Low coolant temperature indi-cator light “ ”The low coolant temperature indicator lightcomes on when the coolant temperature islow and informs the rider that the snowmobileshould be warmed up. After the engine isstarted, warm it up until the indicator lightgoes off.The snowmobile can be operated normally af-ter the indicator light goes off.NOTE:Operate the snowmobile at low speeds whenthe low coolant temperature indicator light ison. If the engine speed is too high, maximumengine speed is reduced to protect the en-gine.ESU10441Fuel meter, grip warmer levelindicator, rear suspensioncompression damping level in-dicator, and thumb warmer lev-el indicatorThe fuel meter, grip warmer level indicator,rear suspension compression damping levelindicator, and thumb warmer level indicatorhave eight segments which show the amountof fuel remaining in the fuel tank, the gripwarmer level or the thumb warmer level, and1. “SELECT” button2. “RESET” button3. Display brightness level1. High beam indicator light “ ”1. Low coolant temperature indicator light“ ”