SPEC51POWER TRAINParts to be tightened Tightening torque RemarksNm m•kg ft•lbPrimary sheave (1st) 120 12.0 85 Tighten the bolts in twostages. See NOTE.(2nd) 60 6.0 43Spider and sliding sheave 200 20.0 145 Left-hand thread.Apply LOCTITE ®Primary sheave cap and sliding sheave 14 1.4 10Roller and weight (primary sheave) 6 0.6 4.3Secondary sheave 64 6.4 46Stopper (secondary sheave) 8 0.7 5.1Spring seat (secondary sheave) 23 2.3 17Bolt (secondary sheave clearance) 10 1.0 7.2Drive sprocket 90 9.0 65Locknut chain tensioner 25 2.5 18Chain housing and frame 48 4.8 35Driven sprocket 48 4.8 35 (RX10RTW, RX10MSW)Apply LOCTITE ®Drain bolt (drive chain housing) 16 1.6 12Chain housing cover 24 2.4 17Shift lever assembly 23 2.3 17 (RX10RTW, RX10RTRW,RXW10GTW)Lever and drive chain housing cover 10 1.0 7.2 (RX10RTW, RX10RTRW,RXW10GTW)Apply LOCTITE ®Shaft (reverse drive gear) 10 1.0 7.2 (RX10RTRW,RXW10GTW)Apply LOCTITE ®Reverse driven gear 55 5.5 40 (RX10RTRW,RXW10GTW)Apply LOCTITE ®Counter gear 10 1.0 7.2 (RX10RTRW,RXW10GTW)Apply LOCTITE ®Spacer set screw 6 0.6 4.3 Apply LOCTITE ®Chain housing and brake caliper 48 4.8 35Bleed screw (brake caliper) 6 0.6 4.3Brake hose union bolt (caliper side) 30 3.0 22Brake hose union bolt (brake master cylinder side) 30 3.0 22Bearing nut (secondary shaft) 55 5.5 40Parking brake 10 1.0 7.2Parking brake assembly and lever 23 2.3 17TIGHTENING TORQUE