PERIODIC MAINTENANCE AND ADJUSTMENT6-37123456789101112EAU25081Rear wheelEAU59611To remove the rear wheelWARNINGEWA10822To avoid injury, securely support thevehicle so there is no danger of itfalling over.1. Loosen the axle nut and the braketorque rod nut at the brake shoeplate.2. Disconnect the brake torque rodfrom the brake shoe plate by re-moving the nut, washer and thebolt.3. Place the motorcycle on the cen-terstand.4. Remove the brake pedal free playadjusting nut, and then disconnectthe brake rod from the brake cam-shaft lever.5. Loosen the drive chain puller lock-nut and the drive chain slack ad-justing bolt on both ends of theswingarm.6. Remove the axle nut and washer.7. While supporting the rear wheel,pull the wheel axle out.8. Remove the chain puller assem-blies and the spacer.1. Brake rod2. Brake camshaft lever3. Brake pedal free play adjusting nut4. Drive chain slack adjusting bolt5. Drive chain puller locknut6. Drive chain puller7. Washer8. Axle nut9. Brake torque rod nut10.Brake torque rod1 10345 6 7 89721. Drive chain slack adjusting bolt2. Drive chain puller locknut3. Axle nut4. Washer3214
